Dinse Wire Feed Systems
Robot-arm mounting wire feeder
Wire feeder with large spool housing
Wire feeder for bulk wire feed (e.g. marathon pack)
PUSH-PUSH or PUSH-PULL drive system at torch head
If your welding process involves adding material, it is important to have reliable equipment for delivering that material (in most cases as a wire), at a constant rate, to the end of the welding arc.
Whether you are welding with MIG, TIG, laser or plasma, Dinse's wire feed systems ensure constant wire feed rate and tension over long distances.
PUSH-PUSH operation uses a torque controlled motor mounted to the robot arm or on the floor to feed wire 'on demand' and an rpm controlled motor at the torch head to provide a constant wire feed rate where it's needed, independent of torsion and bending. This is particularly critical when feeding thin or soft wires.
PUSH-PULL operation links the remote wire feeder and the drive in the torch head together so that the feed wire is kept under constant tension throughout the system. This ensures a constant feed rate over long distances when feeding wires with large cross-sections such as flat wire.
